AS/NZS 1163:2016 · Cold-formed structural steel hollow sections
Definitions and Notations
Sub-clauses
- 3.1Analysis
- 3.2Batch
- 3.3Can
- 3.4Cold-formed hollow section
- 3.5Cold-rolled and annealed coil
- 3.6Crack
- 3.7Defects
- 3.8Factory production control
- 3.9Fine grained steels
- 3.10Heat
- 3.11Hot-rolled coil
- 3.12Inspection
- 3.13Lap
- 3.14Longitudinal direction
- 3.15Longitudinal weld seam
- 3.16Manufacturer
- 3.17May
- 3.18Purchaser
- 3.19Seams (defect)
- 3.20Shall
- 3.21Should
- 3.22Structural hollow sections
- 3.23Supplier
- 3.24Testing
- 3.25Test piece
- 3.26Test sample
- 3.27Test specimen
- 3.28Transverse direction
- 3.29Type testing
- 3.30Unit
Korbel lists only the clause number and title for reference. It does not reproduce the text of AS/NZS 1163:2016. Always refer to the official published standard.
Comments
Sign in as an individual to comment.